Standards
| Standard Code | Organization | Title/Scope | Key Requirements | Testing/Certification Required |
|---|---|---|---|---|
| EN 115-1:2017 | European Committee for Standardization | Moving Walks Construction & Installation | Maximum speed 0.75m/s (horizontal), 0.5m/s (inclined), Maximum inclination 12°, Pallet width 800-1100mm | CE marking, Notified body inspection |
| ASME A17.1/CSA B44 | American Society of Mechanical Engineers | Moving Walks Safety Code | Pallet design, Maximum slope 12°, Handrail requirements, Emergency brake systems | Third-party certification, Annual inspection |
| GB 16899-2011 | Standardization Administration of China | Moving Walks Safety | Pallet strength requirements, Drive system specs, Safety clearances | Chinese quality certification, Type testing |
| ISO 22201-1:2017 | International Organization for Standardization | Programmable Safety Systems | Control system safety, Risk assessment, Software validation | Third-party certification, System validation |
| JIS A 4302 | Japanese Industrial Standards | Moving Walks Standards | Construction requirements, Safety features, Operating parameters | JIS certification, Regular inspection |
| EN 115-2 | European Committee for Standardization | Existing Moving Walks Safety | Modernization rules, Safety improvements, Maintenance requirements | Safety inspection, Upgrade certification |
| IEC 60204-1 | International Electrotechnical Commission | Electrical Equipment Safety | Electrical protection, Control circuits, Emergency systems | Electrical safety certification, Testing |
| ISO 14798 | International Organization for Standardization | Risk Assessment | Risk analysis methods, Safety considerations, Documentation | Risk assessment validation, Expert review |
| EN 13015 | European Committee for Standardization | Maintenance Rules | Maintenance procedures, Service intervals, Documentation | Maintenance certification, Regular audits |
| AS 1735.5 | Standards Australia | Moving Walks Requirements | Construction specs, Safety features, Installation guidelines | Australian certification, Safety inspection |
| IEC 61508 | International Electrotechnical Commission | Functional Safety | Safety lifecycle, Risk assessment, SIL requirements | Independent assessment, Validation |
| ISO 18738-2 | International Organization for Standardization | Ride Quality Measurement | Vibration limits, Noise levels, Comfort parameters | Quality verification, Performance testing |
| NFPA 130 | National Fire Protection Association | Transit Systems Requirements | Emergency provisions, Fire safety, Evacuation requirements | Fire safety certification, Emergency testing |
| BS 7801 | British Standards Institution | Moving Walks in Public Areas | Public safety requirements, Access provisions, Emergency features | UK certification, Safety inspection |
| ISO 9001:2015 | International Organization for Standardization | Quality Management | Quality control, Documentation, Process management | QMS certification, Regular audits |
Key Differences from Escalators:
| Parameter | Travelator Requirement | Escalator Requirement |
|---|---|---|
| Maximum Inclination | 12° | 30° or 35° |
| Speed Limits | 0.75m/s (horizontal), 0.5m/s (inclined) | 0.75m/s |
| Pallet/Step Width | 800-1100mm typical | 600-1000mm typical |
| Loading Capacity | 450kg/m² minimum | 400kg/m² minimum |
| Emergency Brake Distance | ≤1m + v²/13 | ≤1m + v²/10 |
| Handrail Height | 900-1100mm | 900-1100mm |
| Transition Curves | Minimum radius requirements | Different radius requirements |
| Operating Environment | Often outdoor-rated | Typically indoor |
| Fire Safety | Additional requirements for long runs | Standard requirements |
| Maintenance Access | Extended access requirements | Standard access requirements |
Additional Considerations:
| Aspect | Requirements | Verification Method |
|---|---|---|
| Weather Protection | IP54 minimum for outdoor units, Drainage systems, Corrosion resistance | Environmental testing, IP certification |
| Load Capacity | Higher continuous load rating, Cart traffic considerations | Load testing, Durability verification |
| Surface Treatment | Anti-slip requirements, Drainage patterns, Pallet design | Slip resistance testing, Pattern verification |
| Emergency Systems | Extended emergency stop distances, Multiple stop stations | Emergency system testing, Distance verification |
| Accessibility | ADA compliance, Cart access requirements, Mobility device provisions | Accessibility certification, User testing |
Our Partners
- FR2 Infrastructure – Constructability advise and project and planning controls
- Staging Diagrams – Staging diagrams for possession planning
✨ Support Our Mission ✨
Help us continue building tools that simplify complexity!
Every contribution fuels new features and improvements
Thank you for being part of our journey! 🚀
